The application of color mastering machine machinery and equipment has an indispensable effect in industrial production, so we should properly understand the application of machinery and equipment when applying machinery and equipment. The metering-verified masterbatch mixer is suitable for fully automatic mixing of pellets, secondary materials, masterbatch or preservatives.

Under normal conditions, the masterbatch machine is immediately installed at the feed outlet of the forming machine to avoid the loosening of the relevant parts caused by the shaking of the control box with the posture of the forming machine screw. It is proposed to fix the control box to a certain support frame. on. The motor transmission ratio of this product is divided into 30:1 and 50:1, and the screw diameters are divided into four types: 12, 16, 20, and 24mm. Six models can be evolved to show a different output of 0.1 to 50 kg per hour. Customer selection. There is also a two-color masterbatch machine, which can be combined and used at will according to customer satisfaction. When applying the color masterbatch machine, you must carry out proper practical operations in accordance with the product manual at the beginning. Do not do it arbitrarily to prevent damage to the color masterbatch machine and cause unnecessary damage, and it will not be possible to carry out the actual operation independently until the use time is long. Will jeopardize the actual effect of the application. The actual operation process of the masterbatch machine is as follows:

Masterbatch machine

1. Turn on the main switch of the secondary power supply behind the control box of the masterbatch machine;

2. What kind of pipe fittings are to be produced today, press the "set" button a few times to enter the main internal parameters of the "main parameters at work", and change the screw number to a matching color. If the gray and black color is the screw number 01, change the matching data after the screw number to 01 and press the "set" key to save. Press the "Stop" button twice to return to the web page that was prepared for operation in advance.

3. Press the green button to display the message "Ready" at the bottom left of the controller text. At this time, the server starts and there is a rate of 5 revolutions per minute. The text at the bottom left of the controller changes from "Ready" to "In Operation".

4. When the yellow light is flashing, the lower left side of the controller's text displays the message "In operation" changes to "Short material stop", indicating that the material level in the silo is less than the inspected part, indicating that the masterbatch must be added.

5. When the green light is flashing to control the load of the thermal relay of the mixing motor, please check whether the current of the thermal relay is adjusted very small, or there are many tapes wound on the mixing shaft or the motor is short-circuited.